Round Straight
10–30 ft
The clean, familiar profile for parking lots, pathways and site lighting.
- One-piece straight shaft
- Square anchor base with cover
- Side-drilled or tenon top
Steel lighting poles. Made in the USA. Built to stand.
From 10-foot parking lot poles to 150-foot stadium structures — engineered, welded and finished under one roof.
- Made in the USA
- Build America, Buy America compliant
Every Sequoia structure is engineered for its specific use, its structural load and the place it will stand. Then it’s built by welders and fitters with decades behind them. Indoors. In Texas.
Anatomy of a pole
Every detail has a job.
Scroll to take one apart.
From the parking lot
to the ballpark.
The lineup
Three profiles.
One standard.
Every pole includes a hand hole, top cover and the features others add as options.
Round Tapered
20–120 ft
Height with grace. Area lighting up to sports and high-mast structures.
- Constant taper, base to tip
- Sectional for taller heights
- Direct embed or anchor base
Square Straight
10–40 ft
Crisp architectural lines, with flat faces that make mounting easy.
- One-piece square shaft
- Square anchor base with cover
- Side-drilled or tenon top
PRO-ARM cross-arms
Over-built, on purpose.
Two to fourteen fixtures on one arm of quarter-inch structural steel tube — top mount or over/under.
American made. American proud.
Made in the USA.
Every Sequoia pole and PRO-ARM cross-arm is built in our own shop in Conroe, Texas — and complies with Build America, Buy America requirements.
Made in the USA.
Cut, formed, welded and finished by our own crew, under one roof, just north of Houston.
Build America, Buy America compliant.
Our products meet the Build America, Buy America (BABA) domestic-preference requirements that apply to federally funded infrastructure projects.
Ready for funded projects.
Schools, parks, municipal fields, transportation. Tell us it’s a Buy America project when you request a quote.
Range
Ten feet to one-fifty.
Parking lots, campuses, ballfields and high-mast lighting. One shop builds them all.
Our shop
Everything under one roof.
All fabrication happens in a controlled indoor environment, away from the elements — with the capacity to keep big projects moving.
More than 100 combined years of steel design, fabrication and welding.
Most of our welders and fitters came up through the bridge and iron shops of Houston.
12,500sq ft
A controlled environment, with a semi-truck pull-through.
500/ month
Round or square poles from 10 to 40 feet.
10,000lb
Plus beam-crane fit-up stations.
60ft
Capacity of our pole-shaft rotating fixture.
Engineered for where it stands.
Each structure is designed for its use, load and location, to AASHTO or the commercial code you specify. Stamped structural and foundation drawings are available, sealed for the state of installation.
2.5acres
Fenced, secured raw shaft storage.
Finishes
Protected for decades.
The finish keeps weather off the steel — and keeps what’s on top of the pole safely in the air.
Galvanized
Hot-dip galvanized to ASTM A123. The most durable finish we offer.
Powder coat
The most refined appearance of the three.
Paint
A classic color finish, alone or in combination.
Galvanized + powder
Both together: lasting beauty with unmatched product life.
American made. American proud.
Made in Conroe, Texas.
Our poles, cross-arms and lighting controls are all made right here in the United States, just north of Houston — and comply with Build America, Buy America requirements.
Questions
Good to know.
Are Sequoia Monopole poles made in the USA?
Yes. Every Sequoia pole and PRO-ARM cross-arm is fabricated in our own shop in Conroe, Texas, just north of Houston.
Are your products Build America, Buy America (BABA) compliant?
Yes. Our poles and cross-arms comply with the Build America, Buy America requirements that apply to federally funded infrastructure projects. Tell us it is a Buy America project when you request a quote.
What heights of steel light pole do you build?
Round straight poles from 10 to 30 feet, square straight poles from 10 to 40 feet, and round tapered poles from 20 to 120 feet. Structures to 150 feet and beyond are engineered on request.
Do your poles use a direct embed or an anchor base?
Round tapered poles are direct embed as standard, with an anchor base available as an option. Round straight and square straight poles use a welded anchor base with a base cover.
What finishes are available?
Hot-dip galvanized to ASTM A123, powder coat, paint, or galvanizing with powder coat over it.
How many fixtures can a PRO-ARM cross-arm carry?
Two to fourteen on a single arm: up to seven top-mounted, or up to seven over seven in an over/under arrangement.
How do I get a quote?
Send us your project through the quote request form, call (936) 243-4260 or email sales@sequoiamonopole.com. Every quote comes with a specification sheet for the exact pole we are proposing.